1. Sony Hdr-cx130e Mac Software 2017
2. Mac Software Update
3. Sony Hdr-cx130e Mac Software Update
4. Sony Handycam Hdr-cx130 Manual

Mac Solution: How to Convert Sony Handycam AVCHD to MP4 on Mac OS X? Install and run this Pavtube MTS/M2TS Converter for Mac, then load your recorded Handycam files to the software by clicking 'File'Add Video/Audio' or 'Load from Folder' Step2.

Sony Hdr-cx130e Mac Software 2017

For the Remote shooting, stabilize the camera with a tripod or using some other method, and then connect the camera to the computer.
The connection and setting methods vary depending on the model.

Mac Software Update

Connecting ILCE-9M2/7RM4 to a computer

You can connect the camera via USB using a USB cable, wired LAN connection*, or wireless W-Fi connection.
* Supported devices: ILCE-9M2

Sony Hdr-cx130e Mac Software Update

Sony Handycam Hdr-cx130 Manual

1. On the camera, perform the following setting.

   • MENU → (Network) → [Ctrl w/ Smartphone] → [Ctrl w/ Smartphone] → [Off]
   • MENU → (Network) → [PC Remote Function] → [PC Remote] → [On]

2. On the camera, select [PC Remote Cnct Method] from the following options.

   [USB]

   Connect the camera and computer using the supplied USB cable.

   [Wired LAN] (ILCE-9M2 only)

   Connect the camera and computer using a general LAN cable sold in the market. After connecting, perform pairing of the camera with the computer. Connection method

   1. Connect the camera and computer or switching hub using a LAN cable.
   2. Select [PC Remote Function] → [Pairing] to perform pairing of the camera with the Remote application.
      If [Connect without Pairing] is available on the camera, set it to [Enable] to connect without pairing.

   [Wi-Fi Direct]

   Connect the camera and computer using Wi-Fi without passing through an access point. Connection method

   1. Select [PC Remote Function] → [Wi-Fi Direct Info.] to display an SSID and password of the camera.
   2. Perform a Wi-Fi connection to the camera from the computer using the displayed SSID and password.

   [Wi-Fi Access Point]

   Connect the camera and computer using Wi-Fi via an access point. It is necessary to perform pairing of the camera and computer. Connection method

   1. Select (Network) → [Wi-Fi Settings] → [WPS Push] or [Access Point Set.] to connect the camera and computer to the same access point.
   2. Select [PC Remote Function] → [Pairing] to perform pairing of the camera with the Remote application.
      If [Connect without Pairing] is available on the camera, set it to [Enable] to connect without pairing.

3. On the computer, launch Remote.

4. If multiple cameras are connected to the computer, select a camera to use for Remote Shooting from the device selection window.